Home > Complete Systems
Sort By:
Page of 1
Complete system for rain water harvesting and filtering.

1st Choice Complete System

This is our top of the line complete below-ground system

Bruiser 1500 gallon below ground single compartment tank

  • 135”L x 55”W x 70”H
  • The Bruiser is a very tough multipurpose tank. It can be used as a septic tank, a pump chamber or as a cistern tank for potable water. Backfill with native soils and no water needed during backfilling.
  • Rugged, ribbed design
  • FDA approved
  • Light weight for easy transport and installation

Graf Optimax Self Cleaning Filter
  • This filter has a unique cascade design that provides a high level of filtering efficiency.
  • Low maintenance as it is self cleaning
  • For pedestrian loading with plastic cover or for vehicle loading with cast iron cover
  • Provides over 95% water yield
  • TÜV-tested to German standards
  • Variable installation depth of 570 mm-1050 mm (22.4-41.3'') using telescopic dome shaft
  • Lockable childproof cover
  • Maximum roof surface area of 350 sqm with connections DN 100 and 750 sqm
  • Minimal height offset (200 mm / 7.9'') between the inlet and outlet
  • Maximum roof surface area
  • Optimal output (>95%) is achieved thanks to a patented filter principle
  • Very smooth surface and therefore max. self-cleaning
  • Mesh wide 0,35 mm (0.01)
  • Optional with cleaning unit Opticlean
  • 95% recovery for roof up to 5000 sq ft
  • 350 micron filtration
  • telescopic access way with lid
  • easily accessible filter element
  • optional spray head for filter rinsing
  • telescopic riser for height adjustment
Grundfos SBA 3-45 AW
  • The new Grundfos SBA is a complete all-in-one unit. It is built on
    the proven SB platform, but comes with an integrated control unit
    – eliminating the need for an external pump controller.
  • With the new SBA, everything you need to guarantee reliable
    pumping of water is included.
  • The SBA is literally a plug- and pump solution. Once installed and
    connected to the piping, all you need to do is switch on the pump.
    The result is a reliable solution and greatly reduced installation
Calmed inlet
  • Water enters the storage tank through the 'calmed inlet'. The inlet prevents the disturbance and re-suspension of fine sediments that gather on the bottom of the tank. Another important function of the inlet is the introduction of oxygen into the lower layers of the tank which maintains a fresh supply of water while preventing anaerobic conditions from forming.
Standard overflow siphon
  • The innovative overflow siphon creates a skimmer effect at the max tank level to remove particles that float slowly to the water surface. Removing this floating layer of surface pollutants through regular overflow from the tank is important in order to maintain high quality water. This overflow siphon also includes a rodent-proof mechanism

TUF-TITE 20" tank adapter ring
  • Connects TUF-TITE riser or lid to tank.
TUF-TITE 20" x 12" rise
  • Green, 20 ” x 12 ” riser for TUF-TITE lid.
TUF-TITE 20" lid
  • Green, 20 ” TUF-TITE lid seals to riser with molded-in lid gasket to assure a watertight seal every time. The lid is secured with eight stainless steel screws and a horizontal screw to assure safety. This is a strong lid that is very attractive.
1" Bulkhead fitting
  • For pump outlet pipe to exit the tank man way.
Purchasing this full package system gives a $75.50 discount over purchasing parts individually. Call or e-mail with any questions or for shipping quote. 864-316-5200 joshua@raincollectionsupplies.com