Home > Products > Norwesco - Bushman
Sort By:
Page of 1
Bulkhead Fitting Norwesco double threaded polypropylene Bulkhead Fitting

Available in ¾”, 1”,1 ¼”, 1 ½”, 2”, 3” and 4” sizes

Our Price: $4.95
Bulkhead Fitting 4" Gasket Multi-tite 4" Inlet and Outlet Ring Gasket/Jones-tite Grommet by Norwesco

Bulkhead Fitting 4" Norwesco Gasket

Our Price: $8.35
NORWESCO 2" MPT Vent Cap With Poly Screen 2" Vent Cap with poly screen for cistern vent by Norwesco

2" MPT Vent Cap With Poly Screen for cistern vent
Norwesco # 63266
designed to easily vent your cistern tank

Our Price: $12.99
Bulkhead Fitting 4" SDR 35 Septic Tank Adapter by Norwesco 63151 Bulkhead Fitting 4" SDR 35 Septic Tank Adapter by Norwesco 63151

NPT on PVC or CPVC fittings where the outside of the fitting is threaded to facilitate connection with a female pipe threaded end (FPT). NPT is National Pipe Thread – the US standard for tapered threads.

A 5-1/2” hole must be drilled with a bi-metal style hole saw for each adapter. The hole must be drilled at the small cone-shaped marks that are molded into the ends of the inlet and outlet. The 3/8” location pin on the flange of the adapter must be cut off and filed flush with the flange. The gasket of the adapter goes on the inside of the tank and can be tightened with large adjustable type pliers or pipe wrenches.
B. Drill a 5” hole in the ends of the tank at the cone-shaped inlet/outlet location marks and install a 4” gasket. It is your responsibility to contact the local code official and install the plumbing tee lengths and weights per the requirements.

Our Price: $35.95
Bulkhead Fitting 4" Schedule 40 for liquid storage tank Bulkhead Fitting 4" SCH 40 Septic Tank Adapter by Norwesco

SCH40 compatible 4" Bulkhead Fitting.

Our Price: $47.50
Norwesco Water Tank 120 Gallon Norwesco Vertical Tank 43860 Dark Green

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. These water-storage tanks are produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water).  

The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last!

Our Price: $245.27
Norwesco Tank 165 Gallon 165 Gallon Norwesco Vertical Tank 43864

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. These water-storage tanks are produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water).  

The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last!

Our Price: $265.23
Norwesco Vertical Tank 220 Gallon Norwesco Vertical Tank Black 43870

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. These water-storage tanks are produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water).  

The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last!

Our Price: $274.99
305 Gallon Above Ground Tanks for rainwater collection. 305 Gallon Above Ground Tank Norwesco 40863

Norwesco 305 Gallon Above Ground Tank

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. These water-storage tanks are produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water). The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last! Tanks are pre-installed with: Female threaded 1.5” top-inlet, 2” lower-outlet. Standard 16” threaded manway with vented port . Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $314.89
Water Tank 250 Gallon Free Standing "Doorway" Tank Norwesco 42337

250 Gallon Free Standing Tank

These tanks have been designed with residential and commercial applications in mind. The dimensions of the tanks allow them to fit through a conventional doorway. The design of these tanks allow them to be freestanding/self-supporting and eliminates the need for a steel frame.

Ships From: MN, OH, GA, OK, NY, WA, CA

Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $490.99
550 Gallon Above Ground Tanks for water collection. 550 Gallon Above Ground Tank Norwesco 41364

550 Gallon Above Ground Tank

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. These water-storage tanks are produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water). The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last! Tanks are pre-installed with: Female threaded 1.5” top-inlet, 2” lower-outlet. Standard 16” threaded manway with vented port . Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $514.53
500 Gallon Above Ground Tanks for water collection. 500 Gallon Above Ground Tank by Norwesco 43101

Norwesco 500 Gallon Above Ground Tank

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. These water-storage tanks are produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water). The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last! Tanks are pre-installed with: Female threaded 1.5” top-inlet, 2” lower-outlet. Standard 16” threaded manway with vented port Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $514.60
300 Gallon Spherical Tank 300 Gallon Septic/Spherical Pump Tank Norwesco 41319

300 Gallon Spherical Water Tank by Norwesco


PRICE DOES NOT INCLUDE SHIPPING COSTS. Our sales team will contact you with freight costs.4-6 week lead time


Our 300 spheres are designed to be used as a holding tank or pump tank. Unlike our ribbed tanks, these tanks may remain in the ground when empty. These tanks are furnished with a watertight domed lid and include a molded-in elevated pump stand on the bottom of the tank. The world’s leading manufacturer of polyethylene tanks, Norwesco has been producing polyethylene septic tanks since 1980. With that kind of experience, Norwesco offers you proven products that you can count on for years of dependable, trouble-free service. For septic system replacement and new home construction, Norwesco‘s polyethylene septic tanks are designed for durability and quick, easy installation. Any Norwesco septic tank can be transported to the job site in a pickup truck and carried by just two people. That enables you to install the tank on your schedule. All Norwesco septic tanks are manufactured by means of the rotational molding process, which produces a one-piece, seamless, watertight tank. Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so Norwesco septic tanks will not rust or corrode and require no additional coatings as other tanks do. Norwesco’s strict quality guidelines ensure an environmentally safe septic tank. Norwesco septic tanks come equipped with manhole covers and detailed installation procedures. Manhole extensions and lid/riser combinations are available to bring tank access to grade and to meet code specifications. Norwesco septic tanks are for BELOW GROUND USE ONLY. Using the tanks above ground may result in deformation of the tank. It is far more cost-effective to utilize one of Norwesco's above ground tanks that are specifically designed for above ground use and applications. The tanks described and shown on this page cannot be used as pump tanks and must be kept full at all times. PRE-PLUMBING: All Norwesco septic tanks that are 750 working gallons and above are "pre-plumbed" with PVC inlet and outlet assemblies. Assemblies and their components are made of either SDR35 or SCH40 PVC depending on state or local code requirements. All assemblies are sized according to code requirements as well. An EPDM gasket is placed between the "T" assembly and the tank wall to assure watertightness. Norwesco septic tanks will arrive to you ready for installation. WATERTIGHT DOMED LIDS: Our septic tanks are furnished with a watertight domed lid. This domed lid is significantly stronger than other lid designs. When leaving our factory, the lid(s) will be attached to the tank with stainless steel screws and come standard with a foamed, polyethylene gasket between the lid and the tank. The gasket provides a watertight seal at the lid area. Norwesco septic tanks are backed by a full three-year warranty and have been certified by state and local health departments from coast to coast. Where applicable, Norwesco septic tanks have been certified by both IAPMO and CSA. Across the United States and Canada, there are certain health code requirements that our tanks must meet. These codes are regulated by the state, county or province. To aid you in determining which tank you need, choose the state that the tank is to be installed in from the "State Approvals" box below and the tanks that are approved will appear on your screen.

Our Price: $718.74
1100 Gallon Above Ground Tanks for rain water collection. 1100 Gallon Above Ground Tank Norwesco 40704

The most cost-effective option for most applications, including rainwater collection. The light-weight tanks can be rolled into place by hand and installed on any flat, firm, level surface.

Our Price: $808.50
1000 Gallon Above Ground Tanks for rainwater harvesting. 1000 Gallon Above Ground Tank Norwesco 44115

1,000 Gallon Above Ground Tank

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. These water-storage tanks are produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water). The light-weight tanks can be rolled into place by hand and installed on any flat, firm, level surface. The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last! Tanks are pre-installed with: Female threaded 1.5” top-inlet, 2” lower-outlet. Standard 16” threaded manway.

Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $880.58
1550 Gallon Above Ground Tanks for water collection. Used as part of a rainwater collection system. Made of virgin PE resin which meets the FDA specifications for potable water. Reduce the effect on the water table. Product by Norwesco. 1550 Gallon Above Ground Tank Norwesco 41368

Norwesco 1,550 Gallon Above Ground Tank

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. These water-storage tanks are produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water). The light-weight tanks can be rolled into place by hand and installed on any flat, firm, level surface. The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last! Tanks are pre-installed with: Female threaded 1.5” top-inlet, 2” lower-outlet. Standard 16” threaded manway.
Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $953.99
500 Gallon Septic Tank 500 Gallon Septic Tank 101" x 51" Norwesco 41320

500 Gallon Septic Water Tank by Norwesco



500 Gallon Septic Tanks by Norwesco are rib-sided below ground tanks.  The world’s leading manufacturer of polyethylene tanks, Norwesco has been producing polyethylene septic tanks since 1980. With that kind of experience, Norwesco offers you proven products that you can count on for years of dependable, trouble-free service.

For septic system replacement and new home construction, Norwesco‘s polyethylene septic tanks are designed for durability and quick, easy installation. Any Norwesco septic tank can be transported to the job site in a pickup truck and carried by just two people. That enables you to install the tank on your schedule.

All Norwesco septic tanks are manufactured by means of the rotational molding process, which produces a one-piece, seamless, watertight tank. Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so Norwesco septic tanks will not rust or corrode and require no additional coatings as other tanks do. Norwesco’s strict quality guidelines ensure an environmentally safe septic tank.

Norwesco septic tanks come equipped with manhole covers and detailed installation procedures. Manhole extensions and lid/riser combinations are available to bring tank access to grade and to meet code specifications. The 750, 1000, 1250 and 1500 gallon sizes are available in both one and two compartment configurations.

Norwesco septic tanks are for BELOW GROUND USE ONLY. Using the tanks above ground may result in deformation of the tank. It is far more cost-effective to utilize one of Norwesco's above ground tanks that are specifically designed for above ground use and applications.

The tanks described and shown on this page cannot be used as pump tanks and must be kept full at all times.

PRE-PLUMBING: All Norwesco septic tanks that are 750 working gallons and above are "pre-plumbed" with PVC inlet and outlet assemblies. Assemblies and their components are made of either SDR35 or SCH40 PVC depending on state or local code requirements. All assemblies are sized according to code requirements as well. An EPDM gasket is placed between the "T" assembly and the tank wall to assure watertightness. Norwesco septic tanks will arrive to you ready for installation.

WATERTIGHT DOMED LIDS: Our septic tanks are furnished with a watertight domed lid. This domed lid is significantly stronger than other lid designs. When leaving our factory, the lid(s) will be attached to the tank with stainless steel screws and come standard with a foamed, polyethylene gasket between the lid and the tank. The gasket provides a watertight seal at the lid area.

Norwesco septic tanks are backed by a full three-year warranty and have been certified by state and local health departments from coast to coast. Where applicable, Norwesco septic tanks have been certified by both IAPMO and CSA.

Across the United States and Canada, there are certain health code requirements that our tanks must meet. These codes are regulated by the state, county or province. To aid you in determining which tank you need, choose the state that the tank is to be installed in from the "State Approvals" box below and the tanks that are approved will appear on your screen. *lead time 6-8 weeks. Cost does not include shipping*

Our Price: $982.32
500 gallon Norwesco Freestanding Doorway tank 43616 500 gallon Norwesco Freestanding Doorway tank 43616

These tanks have been designed with residential and commercial
applications in mind. The dimensions of the tanks allow them to fit
through a conventional doorway. The design of the
freestanding/self-supporting tanks eliminate the need for a steel
support frame.

Our Price: $1,107.00
Standing Tank 400 Gallon Free Standing "Doorway" Tank Norwesco 43856

400 Gallon Free Standing Tank by Norwesco

These tanks have been designed with residential and commercial applications in mind. The dimensions of the tanks allow them to fit through a conventional doorway. The design of these tanks allow them to be freestanding/self-supporting and eliminates the need for a steel frame. Ships From: MN, OH, GA, OK, NY, WA, CA
Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $1,166.42
1000 gallon septic tank made of Light-weight polyethelene for easy transport and installation. 1000 Gallon Septic Tank Norwesco 42405

Norwesco 1,000 Gallon Septic Tank

1000 gallon septic tank made of Light-weight polyethylene for easy transport and installation. Molded, ribbed, the one-piece design gives the light-weight tank added strength and contributes to the ease of transport and installation. Manhole extensions and lid/riser combinations are available to bring access to ground level. The world’s leading manufacturer of polyethylene tanks, Norwesco has been producing polyethylene septic tanks since 1980. With that kind of experience, Norwesco offers you proven products that you can count on for years of dependable, trouble-free service.
For septic system replacement and new home construction, Norwesco‘s polyethylene septic tanks are designed for durability and quick, easy installation. Any Norwesco septic tank can be transported to the job site in a pickup truck and carried by just two people. That enables you to install the tank on your schedule.
The tank described and shown on this page cannot be used as pump tanks and must be kept full at all times. Below-ground use only
Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**


Our Price: $1,229.99
2500 Gallon Above Ground Tanks for water collection. Used as part of a rainwater collection system. Made of virgin PE resin which meets the FDA specifications for potable water. Reduce the effect on the water table. Product by Norwesco. 2500 Gallon Above Ground Tank 102D x 79”H Norwesco

Norwesco 2,500 Gallon Above Ground Tank

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. These water-storage tanks are produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water). The light-weight tanks can be rolled into place by hand and installed on any flat, firm, level surface. The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last! Tanks are pre-installed with: Female threaded 1.5” top-inlet, 2” lower-outlet. Standard 16” threaded manway. Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $1,272.89
2500 Gallon Above Ground Tanks for water collection. Used as part of a rainwater collection system. Made of virgin PE resin which meets the FDA specifications for potable water. Reduce the effect on the water table. Product by Norwesco. 2500 Gallon Above Ground Tank 95”D x 91H Norwesco 40867

Norwesco 2,500 Gallon Above Ground Tank

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. This water-storage tank is produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water). The light-weight tanks can be rolled into place by hand and installed on any flat, firm, level surface. The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last! Tanks are pre-installed with: Female threaded 1.5” top-inlet, 2” lower-outlet. Standard 16” threaded manway.

Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**
4

Our Price: $1,382.82
3000 Gallon Above Ground Tanks for water collection. Used as part of a rainwater collection system. Made of virgin PE resin which meets the FDA specifications for potable water. Reduce the effect on the water table. Product by Norwesco. 3000 Gallon Above Ground Tank 95”D x 109”H Norwesco 40635

Norwesco 40635 3,000 Gallon Above Ground Tank

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. These water-storage tanks are produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water). The light-weight tanks can be rolled into place by hand and installed on any flat, firm, level surface. The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last! Tanks are pre-installed with: Female threaded 1.5” top-inlet, 2” lower-outlet. Standard 16” threaded manway.
Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $1,845.79
1500 Gallon Septic Tank 1500 Gallon Septic Tank 143"L x 55"W x 66"H Norwesco 41760

Norwesco 1500 Gallon Septic Water Tank

1500 Gallon Septic Tanks by Norwesco are rib-sided below ground tanks.
Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

The world’s leading manufacturer of polyethylene tanks, Norwesco has been producing polyethylene septic tanks since 1980. With that kind of experience, Norwesco offers you proven products that you can count on for years of dependable, trouble-free service. For septic system replacement and new home construction, Norwesco‘s polyethylene septic tanks are designed for durability and quick, easy installation. Any Norwesco septic tank can be transported to the job site in a pickup truck and carried by just two people. That enables you to install the tank on your schedule. All Norwesco septic tanks are manufactured by means of the rotational molding process, which produces a one-piece, seamless, watertight tank. Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so Norwesco septic tanks will not rust or corrode and require no additional coatings as other tanks do. Norwesco’s strict quality guidelines ensure an environmentally safe septic tank. Norwesco septic tanks come equipped with manhole covers and detailed installation procedures. Manhole extensions and lid/riser combinations are available to bring tank access to grade and to meet code specifications. The 750, 1000, 1250, and 1500 gallon sizes are available in both one and two-compartment configurations. Norwesco septic tanks are for BELOW GROUND USE ONLY. Using the tanks above ground may result in the deformation of the tank. It is far more cost-effective to utilize one of Norwesco's above-ground tanks that are specifically designed for above ground use and applications. The tanks described and shown on this page cannot be used as pump tanks and must be kept full at all times. PRE-PLUMBING: All Norwesco septic tanks that are 750 working gallons and above are "pre-plumbed" with PVC inlet and outlet assemblies. Assemblies and their components are made of either SDR35 or SCH40 PVC depending on state or local code requirements. All assemblies are sized according to code requirements as well. An EPDM gasket is placed between the "T" assembly and the tank wall to assure watertightness. Norwesco septic tanks will arrive at you ready for installation. WATERTIGHT DOMED LIDS: Our septic tanks are furnished with a watertight domed lid. This domed lid is significantly stronger than other lid designs. When leaving our factory, the lid(s) will be attached to the tank with stainless steel screws and come standard with a foamed, polyethylene gasket between the lid and the tank. The gasket provides a watertight seal at the lid area. Norwesco septic tanks are backed by a full three-year warranty and have been certified by state and local health departments from coast to coast. Where applicable, Norwesco septic tanks have been certified by both IAPMO and CSA. Across the United States and Canada, there are certain health code requirements that our tanks must meet. These codes are regulated by the state, county, or province. To aid you in determining which tank you need, choose the state that the tank is to be installed in from the "State Approvals" box below and the tanks that are approved will appear on your screen.

Our Price: $1,954.66
Norwesco 1750 Gallon Low Profile Tank 43550 Norwesco 1750 Gallon Low Profile Tank 43550


List Price: $2,699.99
Our Price: $2,115.27
You save $584.72!
1500 Gallon "Bruiser" Below-Ground Cistern for water collection. Used as part of a rainwater collection system. Reduce the effect on the water table and save on your water bill. Product by Norwesco. Low cost solution to irrigation and other water needs. 1500 Gallon "Bruiser" Below-Ground Single-Compartment Tank Norwesco 41772

Norwesco 1,500 Gallon "Bruiser" Below-Ground Single-Compartment Tank

The Bruiser is a very tough multipurpose tank. It can be used as a septic tank, a pump chamber or as a cistern tank for potable water. Backfill with native soils and no water needed during backfilling. Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $2,232.75
5000 Gallon Above Ground Tanks for rain water collection. 5000 Gallon Above Ground Tank 141”D x 86”H Norwesco 40943

Norwesco 5,000 Gallon Above Ground Tank

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. These water-storage tanks are produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water). The light-weight tanks can be rolled into place by hand and installed on any flat, firm, level surface. The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last! Tanks are pre-installed with: Female threaded 1.5” top-inlet, 2” lower-outlet. Standard 16” threaded manway.
Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $2,744.99
5000 Gallon Above Ground Tank 102”D x 152”H Norwesco 40641 5000 Gallon Above Ground Tank 102”D x 152”H Norwesco 40641

Norwesco 5,000 Gallon Above Ground Tank

When it comes to above-ground water storage, polyethylene (PE) is the most cost-effective option for most applications, including rainwater collection. These water-storage tanks are produced with 100% virgin PE resin (which exceeds requirements for rainwater collection- it meets FDA specifications for potable water). The light-weight tanks can be rolled into place by hand and installed on any flat, firm, level surface. The dark, opaque color is a surprisingly effective camouflage them blend in with the environment and helps prevent water-borne algae growth by blocking sun light. The tanks are UV stabilized and will not break down under harsh outdoor weather conditions. Maintenance-free and made-to-last! Tanks are pre-installed with: Female threaded 1.5” top-inlet, 2” lower-outlet. Standard 16” threaded manway, and a 22" lid.Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $3,232.55
3525 Gallon Below Ground Tank for water collection. Used as part of a rainwater collection system. Made of 100% virgin resin which meets FDA specifications for potable water. Product by Norwesco. 3525 gallon below ground cistern holding tank Norwesco 44390

Norwesco 3,525 Gallon Below-Ground Holding Tank

Norwesco holding tanks are the largest capacity below ground storage tanks made today. Typically used to store water - both potable and non-potable - they can also be used as large-capacity septic tanks. The tank design will accept up to 4" plumbing options. Integral columns in the tank give it excellent structural strength.

Price does not include freight charges - Lead time on this item is 6-8 weeks. Will be shipped freight. Property location will need to be able to receive a truck.**

Our Price: $9,389.00