Like Us On Facebook

Books
Charts and Guides
Product PDF's
RWH Manuals
Links

Join our mailing list!






Rain Collection Supplies is an Upfront Merchant on TheFind. Click for info.
Home > Accessories > Plumbing and Fittings
Sort By:
Page of 4
FLEX-DRAIN Coupler
Our Price: $1.25

FLEX-Drain The smartest drainage solution system on earth-or in it.
FLEX-DRAIN Pipe Using no-break copolymers and 100% “virgin” grade material, FLEX-Drain® is made with seamless extrusion technology for enhanced performance and durability.
Female coupler for joining two cut pieces of FLEX-Drain® together. Also used to adapt FLEX-Drain® to some wyes and tees to improve the fit and function of the overall system. Or simply use our Flexible T / Y Combo, mentioned below.
FLEX-DRAIN I.D to I.D. Connector
Our Price: $1.50

FLEX-Drain The smartest drainage solution system on earth-or in it.
FLEX-DRAIN Pipe Using no-break copolymers and 100% “virgin” grade material, FLEX-Drain® is made with seamless extrusion technology for enhanced performance and durability.
Female coupler for joining two cut pieces of FLEX-Drain® together. Also used to adapt FLEX-Drain® to some wyes and tees to improve the fit and function of the overall system. Or simply use our Flexible T / Y Combo, mentioned below.
1/2" UNISEAL Flexible Tank Adapter (bulkhead).
Our Price: $1.75

1/2" UNISEAL Flexible Tank Adapter (bulkhead).
Plumbing through tank walls is made much easier and less expensive using a Uniseal®. Unlike bulkhead fittings a Uniseals can handle slight irregularities or curvatures without leaking.
Feel like rubber, but they are made of DuPont Alcryn® rated to 40 psi and warranted for 25 years.
Instructions
1-Cut hole with holesaw to the size indicated.
2-Ensure that the hole is cut clean. Irregular holes could cause poor seating and possible leaks.
3-Insert the uniseal with the wide surface facing out.
4-Make certain the pipe to be inserted is cut clean and square, file or sand the edges so there are no rough or sharp edges to cut the uniseal surface.
5-Use liquid soap or teflon lube on the pipe to be inserted. Insert the pipe into the uniseal as far as needed to clear the inside of the seal by about 1". The lubricant will be squeezed off of the pipe as it passes through the uniseal.

For 1/2" pipe (FITBG00.5) = 1.25 Hole Saw
1
1" UNISEAL Flexible Tank Adapter (bulkhead).
Our Price: $2.00

1" UNISEAL Flexible Tank Adapter (bulkhead).

Plumbing through tank walls is made much easier and less expensive using a Uniseal®. Unlike bulkhead fittings a Uniseals can handle slight irregularities or curvatures without leaking.

Feel like rubber, but they are made of DuPont Alcryn® rated to 40 psi and warranted for 25 years.

Instructions

1-Cut hole with holesaw to the size indicated.

2-Ensure that the hole is cut clean. Irregular holes could cause poor seating and possible leaks.

3-Insert the uniseal with the wide surface facing out.

4-Make certain the pipe to be inserted is cut clean and square, file or sand the edges so there are no rough or sharp edges to cut the uniseal surface.

5-Use liquid soap or teflon lube on the pipe to be inserted. Insert the pipe into the uniseal as far as needed to clear the inside of the seal by about 1". The lubricant will be squeezed off of the pipe as it passes through the uniseal.

 

For 1" pipe (FITBG01) = 1.75 Hole Saw
1.5
1.5" UNISEAL Flexible Tank Adapter (bulkhead).
Our Price: $2.50

1.5" UNISEAL Flexible Tank Adapter (bulkhead).

Plumbing through tank walls is made much easier and less expensive using a Uniseal®. Unlike bulkhead fittings a Uniseals can handle slight irregularities or curvatures without leaking.

Feel like rubber, but they are made of DuPont Alcryn® rated to 40 psi and warranted for 25 years.

Instructions

1-Cut hole with holesaw to the size indicated.

2-Ensure that the hole is cut clean. Irregular holes could cause poor seating and possible leaks.

3-Insert the uniseal with the wide surface facing out.

4-Make certain the pipe to be inserted is cut clean and square, file or sand the edges so there are no rough or sharp edges to cut the uniseal surface.

5-Use liquid soap or teflon lube on the pipe to be inserted. Insert the pipe into the uniseal as far as needed to clear the inside of the seal by about 1". The lubricant will be squeezed off of the pipe as it passes through the uniseal.

 

For 1.5" pipe = 2.50 Hole Saw
FLEX-DRAIN Downspout Adaptor 3"x4"x4"
Our Price: $4.25

FLEX-Drain The smartest drainage solution system on earth-or in it.
FLEX-DRAIN Pipe Using no-break copolymers and 100% “virgin” grade material, FLEX-Drain® is made with seamless extrusion technology for enhanced performance and durability.
Features an inner dimension that connects to 3” pipe and an outer dimension that connects to 4” pipe. The most economical solution for connecting FLEX-Drain® 3” and 4” corrugated pipe and 4” PVC.
FLEX-DRAIN Elbow/Connector
Our Price: $4.25

FLEX-Drain The smartest drainage solution system on earth-or in it.
FLEX-DRAIN Pipe Using no-break copolymers and 100% “virgin” grade material, FLEX-Drain® is made with seamless extrusion technology for enhanced performance and durability.
Expands up to 21” to connect 3” and 4” corrugated pipe and 4” PVC . It creates any angle or turn, expands to reach pipes that have been cut short and is an excellent repair piece for damaged sections of pipe.
2
2" UNISEAL Flexible Tank Adapter (bulkhead).
Our Price: $4.25

2" UNISEAL Flexible Tank Adapter (bulkhead).

Plumbing through tank walls is made much easier and less expensive using a Uniseal®. Unlike bulkhead fittings a Uniseals can handle slight irregularities or curvatures without leaking.

Feel like rubber, but they are made of DuPont Alcryn® rated to 40 psi and warranted for 25 years.

Instructions

1-Cut hole with holesaw to the size indicated.

2-Ensure that the hole is cut clean. Irregular holes could cause poor seating and possible leaks.

3-Insert the uniseal with the wide surface facing out.

4-Make certain the pipe to be inserted is cut clean and square, file or sand the edges so there are no rough or sharp edges to cut the uniseal surface.

5-Use liquid soap or teflon lube on the pipe to be inserted. Insert the pipe into the uniseal as far as needed to clear the inside of the seal by about 1". The lubricant will be squeezed off of the pipe as it passes through the uniseal.

 

For 2" pipe = 3.00 Hole Saw
Bulkhead Fitting 4
Bulkhead Fitting 4" Gasket
Our Price: $6.00

Bulkhead Fitting 4" Gasket
3
3" UNISEAL Flexible Tank Adapter (bulkhead).
Our Price: $6.00

3" UNISEAL Flexible Tank Adapter (bulkhead).

Plumbing through tank walls is made much easier and less expensive using a Uniseal®. Unlike bulkhead fittings a Uniseals can handle slight irregularities or curvatures without leaking.

Feel like rubber, but they are made of DuPont Alcryn® rated to 40 psi and warranted for 25 years.

Instructions

1-Cut hole with holesaw to the size indicated.

2-Ensure that the hole is cut clean. Irregular holes could cause poor seating and possible leaks.

3-Insert the uniseal with the wide surface facing out.

4-Make certain the pipe to be inserted is cut clean and square, file or sand the edges so there are no rough or sharp edges to cut the uniseal surface.

5-Use liquid soap or teflon lube on the pipe to be inserted. Insert the pipe into the uniseal as far as needed to clear the inside of the seal by about 1". The lubricant will be squeezed off of the pipe as it passes through the uniseal.

 

For 3" pipe = 4.00 Hole Saw