Leader's X-1200 Submersible 1 HP  Pressure Pump with a 1" Threaded Intake, and Floating Inlet Strainer

Leader's X-1200 Submersible 1 HP Pressure Pump with a 1" Threaded Intake, and Floating Inlet Strainer

Leader Divertron X-1200 1HP, 115V submersible automatic rainwater pump with integrated on/off control and run-dry protection. This model comes with a 1" threaded inlet for use with a floating inlet strainer. The 3P Pump Intake floats 4 inches below the water's surface, allowing the pump to draw from the cleanest water in the tank. A ball float, filled with air, suspends the intake. High-quality, flexible hose is food grade and specially formulated to resist biological activity. This is a self sinking hose that allows filter and check valve to hang properly. The pump has a built-in check valve and comes with a stainless steel mesh screen. Made of lead-free brass. The hose is 1” diameter and 6’ long. With this powerful 1HP pump, you get all the benefits of a pump, pump base, pump controller, float switch and check valve in 1 easy to install package!

Includes:

• 1 Divertrton 1200, 1 HP pump w/Check Valve on the Pump
• 1 Floating Inlet Strainer
• 48ft. power cord
• 6ft. Sinking Suction Hose

Pump Specifications

• Built-in electronic pressure switch and flow sensor
• Equipped with dry-run protection and built-in non return check valve
• Easy to use
• No wiring or pump start relay required for irrigation systems
• High reliability
• High performance 4-stage pump design
• Supplied with 48 Ft. power cord
• 115V A/C, 10 Amps Max.
• Equipped with 1" FPT stainless steel ring (intake) for use with floating strainer
• 157' Max Total Dynamic Head (TDH)
• Up to 25 GPM
• Up to 64 PSI
• CSA Approved